Bulb Dimensions: Morimoto 2 Stroke 3.0 LED

Dimensions for Morimoto 2 Stroke 3.0 LED Bulbs

Picture this, you have just purchased a set of LED bulbs for your vehicle. When you go to install them, you realize the bulb is too wide. It happens, we get it. If only there were a guide on all the necessary measurements needed to ensure you have purchased the right bulb…

You are in luck! To answer that question, we have gathered the bulbs from four different brands: S-V.4, Morimoto, GTR Lighting, and Xenon Depot. Over the last few weeks, we measured various points on each bulb so that you can be sure that the bulb is the right fit for you.

Each bulb already has a compatibility designator, this will be in the form of either an H# (H4, H11, H13 i.e.), a four-digit number (9008, 9007, 9012, i.e.), or a three-digit number (880 or 883) that defines what kind of housing the bulb will fit in. If that is not enough security for your Morimoto purchase, look no further than this post.

Each bulb is measured in millimeters and rounded to the nearest whole number. Each measurement is for the widest point on that part of the bulb.

For measurements from other brands see the following posts:

1. GTR Lighting LED
2. Xenon Depot Aftermarket HID and LED
3. Morimoto HID (OEM and Aftermarket)
4. S-V.4 LED

9005/H10: Morimoto 2Stroke 3.0 LED

(LED1517) - Product Listing